Toshiba TCB-SC643TLE Owner's Manual page 10

Central remote controller
 When "--" is displayed on the "Control" screen of All or Zone
All
 When a blank is displayed on the Unit "Control" screen
25.0
°C
 When the following is displayed on the Unit "Control" screen
ON/OFF
25.0
°C
Menu screen
Displayed when changing settings other than the standard settings (temperature, operation mode, air volume, air direction).
Press [ ] (control) on the "Control" screen to enable display.
The display items are different on the "Menu" screen of All and Zone and the Unit "Menu" screen.
All Menu (1/2)
1. Filter Sign Reset
2. Ventilation
3. Off Timer
4. On Timer
5. Energy saving operation
All Menu (2/2)
6 Key lock
7. Information
10 -EN
Displayed when the air conditioner settings do not match.
Next
• When you have changed the settings on the "Control" screen of All or Zone but
• When you have made an individual change on the Unit "Control" screen after
• If you issue a command while - - is displayed, the settings of the local remote
Displayed when there are functions that cannot be changed.
Next
The screen on the left is an example of a model in which air direction cannot be
set.
Blank spaces cannot be selected.
Auto
The general-purpose device control interface is registered.
Next
The only possible operation is start/stop operation.
• When a device other than an air conditioner is connected
Menu name
Filter Sign Reset
Ventilation
Off Timer
On Timer
Energy saving
operation
Key lock
Information
there is an air conditioner whose settings cannot be changed because there is no
corresponding function
changing the settings on the "Control" screen of All or Zone
control for that item are not changed.
In the case of Total Heat exchange, Ventilation Settings can be done with the
menu.
Used to cancel the FILTER Sign. (P.25)
The FILTER timer is also reset.
The FILTER timer is reset even if the FILTER Sign is not
issued.
Used to control the Total Heat exchange Unit (indoor unit
dedicated to ventilation) linked with the air conditioner. (P.23)
This menu is also valid for Total Heat exchange alone.
Used to set the time until operation stops. (P.19)
Not displayed on the Unit "Menu" screen.
Used to set the time until operation starts. (P.19)
Not displayed on the Unit "Menu" screen.
Used for energy-saving operation that limits the output of the
air conditioner. (P.22)
Not displayed on the Unit "Menu" screen.
Used to prohibit the operation of the local remote control
buttons. (P.26)
Used to check the model number and version information of
the Unit. (P.27)
Owner's Manual
Functions