Page 1
Serial Number __________________ Before using this Stretch-N-Go Hog®, study and understand entire Owner’s Manual. SNGH Stretch-N-Go Owner’s Manual EZG Manufacturing Stretch-N-Go Hog 1833 N. Riverview Road ® Malta, OH 45758 EZG Manufacturing 1-800-417-9272 1-800-417-9272 Fax (740) 962-2037 www.ezgmfg.com...
Congratulations on purchasing one of the finest pieces of masonry equipment on the market today! If this is your first EZG Manufacturing product, you will not be disappointed. If you have previously owned an EZG Manufacturing product you will find the same high quality and dependability that you have come to expect from EZG Manufacturing.
DEATH or SERIOUS INJURY. The Stretch-N-Go Hog™ is a material delivery system and is not intended for any other use. Make sure anyone operating the Stretch-N-Go Hog™ is thoroughly familiar with its operation. Keep all unauthorized and untrained personnel, especially children, away from Stretch-N-Go Hog™.
Loading Instructions The Stretch-N-Go Hog™ is factory configured to handle (4) 330 ft. rolls of fencing for a total of ¼ miles of fencing per load. It can be converted to handle (2) 660 ft. rolls by moving the Wire Spooler Mounts from the factory location to the center locations.
Note: Even when switching sizes of wire or from Woven Wire to Barb Wire always leave some fencing in the Stretch-N-Go Hog™. To start new material attached it to material already fed through Pinch Rolls. Remove unwanted Wire when new Wire has fed through the Pinch Rolls.
Cross reference TruStop 242-2042 Obtaining Spare Parts 1. Record the information from the serial number tag located on the tool post of the Stretch-N-Go Hog™ 2. Using the parts table, record part number and component. 3. Contact your local Stretch-N-Go Hog™ dealer or EZG Manufacturing at 800-417-9272 with the information in Steps 1 and 2.
Brake Bleeding Procedure The Stretch-N-Go Hog™ has a sealed automotive type disc brake system. The system is sealed in such a way to pull the caliper open when the Brake Pump screw is completely loosened. This allows the brake pads to pull away from the rotor and allows free spinning of the pinch rolls. To perform this procedure a special Bleeding Adapter (Part Number SNG-A-21) must be purchased from EZG Manufacturing.
Mud Hog® Hydraulic Mixing Station, the Hog Trough® mud pan, the Hog Cart™, the Hog Slopper™, the Booger Hog® Wall Scrubber, the Hog Leg® Wall Brace System, and the Hog Crusher™ Material Recycling System. Stretch-N-Go Hog® EZG Manufacturing 1-800-417-9272...
WARRANTY PROVISIONS OF THIS MACHINE ARE HANDLED DIRECTLY THROUGH THE MANUFACTURER. EZG MANUFACTURING * 1833 North Riverview Road, Malta, OH 43758 * PHONE 1-800-417-9272 * Email: warranty@ezgmfg.com * FAX 740-962-2037 Please take a minute to fill out the survey below so that we can better serve our customers.