GV S603R-PE User Manual

THERMOSTAT S603R-PE
PROGRAMMABLE DIGITAL - WHITE
USER MANUAL

I - INTRODUCTION

Dear User:
Congratulations on choosing a
manual before installing/using the thermostat.
This thermostat is used to control the temperature of heating cables or
heating mats for electric under oor heating in a given room, wether in a
domestic, commercial or industrial environment.
While we try to provide the best device possible, we are always available for
technical support. If you have any questions, please contact us.

II - TECHNICAL PARAMETERS AND MAIN CHARACTERISTICS

Technical parameters
Voltage
Amperage
Working environment
Consumption
Protection index
Programmable temperature
Temperature control precision
Main characteristics
Programs
Probe reading options
External dimensions
Material
Screen background color
Memory in case of electrical failure
Child Lock
Installation

III - CAUTIONS FOR INSTALLATION

ATTENTION!
When being installed, this thermostat may cause an
electric shock. Make sure the installation is done by
a quali ed electrician.
1. Installation should only be done when the electric supply is o , otherwise it can
damage the thermostat and cause an electric shock.
2. Choose the most suitable location for installing the thermostat (about 1,60m
above the oor). It must not be installed at eye level.
3. Installation should not be made at altitudes higher then 2000m above sea level.

IV - INSTALLATION

1. Separate the thermostat from the display using a screwdriver to press the
groove at the back of the thermostat and pushing the display upwards ( g.1).
2. Follow the wiring diagram ( g. 2) to connect the power, the heating cable
and the oor probe.
3. Use the two screws provided to x the outer ring and the thermostat base
to the electrician's deep box previously installed ( g. 3) and make sure that it
is properly installed.
4. Attach the display to the four projections on the mounting plate and push it
downwards (never press the LCD display directly). The installation is complete.
Turn on the power to test the thermostat.
thermostat. Please refer to this user
AC 230V, 50-60Hz
16 A
5ºC ~99ºC
<0.3 W
IP20
5ºC e 35ºC
0.5 ºC
6 daily, 3 weekly
3 (internal, external and both)
86mm x 86mm x 17mm
PC + ABS
Blue
Time and Programs
Yes
Wall-Inserted Type
Fig. 1 - Thermostat opening
Fig. 2 - Wiring diagram
Fig. 3 - Thermostat Installation

V - THERMOSTAT INTERFACE

Manual Mode
Anti-Frozen
Child Lock
Room Temp.
Floor Temp.
Clock
On / O Menu
Button functions
Turn On/O
Short press: Toggles between manual and automatic mode
Long press: Enter programming settings
Time and Day of the week settings
Increases Value
Decreases Value

VI - THERMOSTAT PROGRAMMING

»
TURN ON/OFF
Press the button to turn on the thermostat.
Press the button again to turn o the thermostat and cut the power to the
heating cable or network.
IP 20
AC230V 50/60Hz
current imax:16A
Load
L1 N1 N L
5
1 2 3 4
6
Heating Cable / Mat
16A
N (Neutral Wire)
L (Live wire)
AC220V, 50~60Hz
Floor Sensor
Heating
Period
Week
SET TEMP
Set temperature
Time Setting Increase / Decrease