Section 5: Controls; Throttle Control; Recoil Starter - Yard Machines 370 Series Operator's Manual

SECTION 5: CONTROLS

Recoil Starter

All Models
BLADE CONTROL HANDLE
The blade control handle is located on the upper handle of the mower. See Figure 4. The blade control
handle must be depressed in order to start and operate the unit. Release the blade control handle to stop the
engine and blade.
WARNING:
The blade will be rotating whenever the engine is running.

THROTTLE CONTROL

The throttle control is located on the left side of the upper handle. It is used to regulate the engine speed.
See Figure 4.
• Push the throttle lever forward for fast.
• Pull the throttle lever back for slow.
WARNING:
RECOIL STARTER
The recoil starter handle is attached to the upper handle. See Figure 4. Stand behind the unit in the operating
position to start the unit.
DRIVE CLUTCH CONTROL
Squeezing the drive clutch control engages the drive system. Releasing the clutch control disengages the
drive system. Release the clutch control to slow down when negotiating an obstacle, making a turn or
stopping.
SHIFT LEVER (Models 380 - 389)
The shift lever is located on the drive clutch control housing on the upper handle. See Figure 4. This lever is
used to select the forward speed of the mower. When changing your speed selection, release the drive
clutch control.
Cutting Height Adjustment Lever
The blade control handle is a safety device. Never attempt to bypass its operations.
The throttle control cannot be used to stop the engine.
Blade Control Handle
Drive Clutch Control
Throttle Control
Shift Lever
Figure 4
10
Models 380 - 389