Nevir NVR-128D User Manual page 8

OPERATING INSTRUCTION
Battery Supply
Open the battery compartment and insert as indicated in the compartment three
Batteries, type R20, UM1 or D cells.
For Clock backup, insert as indicated in the compartment two Batteries, type R03,
UM4 or AAA cells.
Mains Supply
If the set is equipped with a 127/220V selector, set this selector to the local mains
voltage.
Connect the mains lead to the wall socket. The mains Supply is switched on.
To disconnect the set from the mains completely, withdraw the mains plug from
the wall socket.
Setting The Clock
1. Check the radio is switched off.
2. Press CLOCK SET for 3 seconds on the front panel to start clock setting.
3. Press Tuning + button for 12-hours/24-hours selection.
4. Press CLOCK SET on the front panel to hour setting.
5. To set the hours, press TUNING + or TUNING - while the display is still
flashing.
6. Press CLOCK SET on the front panel to minute setting.
7. To set the minutes, press TUNING + or TUNING - while the display is still
flashing.
8. Press CLOCK SET on the front panel to complete the clock setting.
Setting The Alarm
1. Check the radio is switched off.
2. Press TIMER SET for 3 seconds on the front panel to start alarm setting.
3. To set the hours, press TUNING + or TUNING - while the display is still
flashing.
4. Press TIMER SET on the front panel to minute setting.
5. To set the minutes, press TUNING + or TUNING - while the display is still
flashing.
6. Press TIMER SET on the front panel to complete the alarm setting.
Remark: Press TIMER SET to enable / disable the alarm function. To make sure
the alarm icon is switch on if alarm function is in using,
-Page 2