Sleep Timer; Setting The Sleep Timer; Canceling The Sleep Timer - Yamaha RX-V620 Owner's Manual

Use this feature to automatically set this unit in the
standby mode after the amount of time you have set. The
sleep timer is useful when you are going to sleep while
this unit is playing or recording a source. The sleep timer
also automatically turns off the external components
connected to AC OUTLET(S).
The sleep timer can only be set with the remote control.

Setting the Sleep Timer

2
A/B/C/D/E
1
Select a source and start playback on the
source component.
2
Set the selector dial to a
position other than the TV
position.
3
Press SLEEP repeatedly
to set the amount of time
before this unit
automatically turns off.
Each time you press SLEEP, the front panel display
changes as shown below.
120
The SLEEP timer is off
(SLEEP OFF).
(This is the state before
SLEEP is pressed.)
V-AUX VCR2/DVR VCR 1
DIGITAL
DSP

SLEEP TIMER

A/B/C/D/E
3
90 60 30
D-TV/CBL DVD MD/CD-R TUNER CD PHONO
SLEEP
VOLUME
4
The "SLEEP" indicator soon lights up on the
front panel display after the sleep timer has
been set.
The display then returns to the previous indication.
V-AUX VCR2/DVR VCR 1
DIGITAL
DSP

Canceling the Sleep Timer

Press SLEEP repeatedly until "SLEEP OFF"
appears on the front panel display.
After a few seconds, "SLEEP OFF" disappears, the
"SLEEP" indicator goes off and the display returns
to the previous indication.
y
• The sleep timer setting can also be canceled by setting this unit
in the standby mode by using STANDBY on the remote control
(or STANDBY/ON on the front panel) or by disconnecting the
AC power cord from the AC outlet.
D-TV/CBL DVD MD/CD-R TUNER CD PHONO
SLEEP
VOLUME
43