Using The Remote Control; Handling The Remote Control - Yamaha RX-V540 Owner's Manual

y MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
u 6.1/5.1
Switches the Dolby Digital EX or DTS ES decoder on or
off.
i STEREO/EFFECT
Switches between normal stereo and DSP effect
reproduction. When you select STEREO the unit mixes
down all Dolby Digital and DTS signals (except the LFE
channel) as well as those 2-channel signals without effect
sounds, to the main left and right speakers.
o NIGHT
Sets the unit in night listening mode.
p SET MENU
Selects the set menu mode.
I Using the remote control
INPUT
STANDBY
/ON
INPUT MODE 6CH INPUT
SILENT
SPEAKERS STEREO PROGRAM A/B/C/D/E PRESET/TUNING
A B
EFFECT NEXT SET MENU
PHONES
30° 30°
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the main unit during operation.
I Handling the remote control
• Do not spill water or other liquids on the remote
control.
• Do not drop the remote control.
• Do not leave or store the remote control in the
following types of conditions:
– high humidity or temperature such as near a heater,
stove or bath;
– dusty places; or
– in places subject to extremely low temperatures.
CONTROLS AND FUNCTIONS
VOLUME
PRESET/TUNING FM/AM
EDIT
TUNING MODE MEMORY
AUTO/MANUAL MONO MAN`L/AUTO FM
VIDEO AUX
CONTROL BASS/TREBLE
VIDEO L AUDIO R
Approximately 6 m (20 feet)
7