Table of Contents
Advertisement
Firmware Upgrades
We are continuously developing the technology used within our product ranges and from time to time we may issue
firmware upgrades. The X
card to EMS. To perform the upgrade, follow the step-by-step instructions provided by the upgrade application.
In the unlikely event that something goes wrong during the upgrade process (e.g. System power outage) the card has a back-up
facility to enable the software to automatically detect and reprogram the upgrade.
Software Installation
The Xtreme software (driver and application) is installed from www.ems-imaging.com/downloads
The installation process should start automatically.
Follow the installation wizard instructions as prompted.
Regular software updates are available from our website:
www.ems-imaging.com/downloads
DV-UHD2 cards allow firmware upgrades to be completed on site rather than returning the
TREME
7
Advertisement
Table of Contents
