Selecting The Speaker System - Yamaha R-V1103 Owner's Manual

Selecting the SPEAKER system

Because one or two speaker systems (as main speakers) can
be connected to this unit, the SPEAKERS switches allow you
to select speaker system A or B, or both at once.
SPEAKERS
A
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
2
3
4
Note
This control is effective only for the sound from the main
speakers.
Adjusting the BASS and TREBLE
controls
BASS
0
l l
2
3
4
5 5
BASS : Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Note
These controls are effective only for the sound from the main
speakers.
B
ON
OFF
BALANCE
0
l l
2
3
4
L 5 5 R
TREBLE
0
l l
2 2 2
3 3 3
4 4 4
5 5
Using the BASS EXTENSION switch
You can boost bass frequency response by setting this switch
to the "ON" position. This switch is effective only on the sound
from the main speakers.
BASS
EXTENSION
Using the TONE BYPASS switch
Press this switch inward (ON) if you want to listen to pure
source sound. The input signal does not pass through the tone
(BASS and TREBLE) control circuitry so that it is unaffected by
the tone control circuitry. Press this switch to release it outward
(OFF) to use the tone control circuitry.
BASS
EXTENSION
TONE
BYPASS
ON OFF
TONE
BYPASS
ON
OFF
31