Controls - Siemens TI353 Series Instruction Manual

en Getting to know your appliance

Controls

By touching the fields, you can e.g.
select and start making a drink or adjust
the coffee strength.
Button Meaning
Switch the appliance on and off
k
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■
■
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 18
espresso Dispensing Espresso
caffe crema Dispensing Caffe crema
or display navigation "¾" (back without saving).
cappuccino Dispensing cappuccino
or display navigation "V" (navigate down).
Dispensing latte macchiato
latte macchiato
or display navigation "ok" (confirm and save).
milk Frothing up milk
Coffee strength
%
Adjusting the coffee strength ~ "Adjusting beverage settings" on page 15
calc'nClean Start the service programme
Flashes when the service programme needs to be performed.~ "Calc'nClean
service programme" on page 23
Make 2 Espresso or 2 Caffe crema at the same time. Position the cups next to one
# another under the coffee dispenser.~ "Operating the appliance" on page 13
&
The fully automatic coffee machine has a cup warmer that can be switched on or off
*
manually with the button. When the cup warmer is on, the button lights up.
:
Risk of burns!
The cup warmer becomes very hot!
Note:
* Depending on the appliance model
--------
10
it is still warm when switched on, or
coffee was not dispensed before the appliance was switched off.
Warning
For optimal warming of cups, place them with the bottom on the cup warmer.