Related Manuals for Genesis GEN2AIO10
Summary of Contents for Genesis GEN2AIO10
- Page 1 <( GENESIS 2 OZONE FILTRATION :::J SYSTEM SERVICE MANUAL <( � °' □ support@www.discount REVISION# watersofteners.com REVISION DATE 9/17/2020...
-
Page 2: Table Of Contents
Table of Contents Application Check List and Flushing Instructions ........2 System Specifications ................3 Product Features and Applications ............4 Product Dimensions and Specification ............ 5 Pre-installation Checklist ................6 Installation ....................7-8 Programming .................... 9 Warranty ....................10... -
Page 3: Application Check List And Flushing Instructions
Application Check List and Flushing Instructions The Genesis 2 AIO system should not be used on water having an iron content above 7 ppm or 7 mg/1. Free chlorine should be removed before passing water through the media. The Genesis 2 AIO removes dissolved iron from water, which is present as ferrous iron. -
Page 4: System Specifications
System Specifications Genesis 2 AIO System Specifications Resin Overall Flow Rate Water (Gallons) Gallons Per Gallons Per Diameter Model* Cubic Height Gallons Per Used Per Backwash Backwash Inches Feet Inches Minute Backwash < 3 PPM > 3 PPM GEN2AIO10 60.9 GEN2AIO15 59.0... -
Page 5: Product Features And Applications
• Mechanical Components The Genesis 2 AIO used internal ceramic discs which are corrosion and abrasion resistant to form and hermetic seal. Rotation of the upper disc aligns to the corresponding lower disc ports for Service, Backwash, Brine & Slow Brine, Brine Refill and Fast Rinse modes. -
Page 6: Product Dimensions And Specification
Product Dimensions and Specifications Model Length(max) Width(max) Height (max) Regeneration Mode Genesis 2 AIO 8.3” 8.75” 7.5” Downflow The valve dimensions are for reference only. Connect Port Dimensions Product Model Inlet Port Outlet Port Drain Port Base Riser Pipe Genesis 2 AIO 1”... -
Page 7: Pre-Installation Checklist
If the water pressure is under 20 psi, a booster pump must be installed before the water inlet. • Replacement parts for the Genesis 2 AIO valve should only be purchased through Discount Water Softeners resellers. Electrical transformers are specific to the Genesis 2 AIO valve from Discount Water Softeners. -
Page 8: Installation
Genesis 2 AIO valve. • Install Valve Base O-ring around the neck of the valve. • Lubricate the center hub O-ring of the Genesis 2 AIO valve. • Install the top basket with a twist and lock action to center hub of the Genesis 2 AIO valve. - Page 9 Installation- Continued Ceramic Bypasses Part Number 41205 Ceramic Bypass...
-
Page 10: Programming
Programming: Display and Instructions Programming Instructions Manual / Delayed Regeneration Pressing at any time results in an immediate manual regeneration. Pressing and holding for 3 seconds, when system is locked, results in a delayed regeneration at the preselected time. One Button to Change the Current Time Pressing and holding the button for 3 seconds, when system is locked, allows the current time of day to be adjusted. -
Page 11: Warranty
Warranty Limited Warranty As described herein, Discount Water Softeners Inc. warrants its products are free from defects in material and workmanship only, when properly installed, operated, and maintained. This warranty is subject to the exceptions herein. Discount Water Softeners Inc. warrants to the original owner that the items listed below, excluding but not limited to wear parts like O-rings, gaskets and seals, will be free from defects in materials and workmanship for the period of time specified below from the original purchase date.