Connections - Yamaha GX-500 Owner's Manual

Yamaha mini component system owner's manual
Hide thumbs Also See for GX-500:
Table of Contents

Advertisement

Connections

Never plug the AC supply lead of this system into the AC outlet until all connections are completed.
INPUT
Subwoofer system
(Separate purchase)
R
Speakers
Connecting speakers
Connect the speakers to the corresponding speaker terminals on the rear of the main unit respectively by using the speaker cords.
Make sure that the polarity of the speaker cords is correct, that is the + and – markings are observed. If these cords are reversed,
the sound will be unnatural and lack bass.
On the speakers
Red: positive (+)
Black: negative (–)
2
1
3
Caution
Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.
When connecting a subwoofer (separate purchase)
You may wish to add a subwoofer to reinforce the bass frequencies.
When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT terminal of the
subwoofer.
* Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that the amplifier and
subwoofer are in the same unit.
* The SUBWOOFER OUT terminal outputs low frequencies from both left and right channels.
(The cut-off frequency of this terminal is 200 Hz.)
SUBWOOFER
OUT
R
L
6
MIN
SEE OW
FOR CON
FRONT
SPEAKERS
L
1 Press the tab
2 Insert the bare wire.
[Remove approx. 5mm
(1/4") insulation from
the speaker wires.]
3 Release the tab and
secure the wire.
Preparations and connections
ANTENNA
FM
GND
AM
75 UNBAL.
DIGITAL OUT
OPTICAL
SUBWOOFER
OUT
AUX/MD
R
L
OUT
IN
R
L
6
MIN./SPEAKER
SEE OWNER'S MANUAL
FOR CONNECTION.
FRONT
SPEAKERS
On the main unit
Red: positive (+)
Black: negative (–)
1
3
2
(U.S.A. model)
MAINS
To AC outlet
1 Press up the tab.
2 Insert the bare wire.
[Remove approx. 5mm (1/4")
insulation from the speaker
wires.]
3 Press down the tab and
secure the wire.
E-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents