Home Decorators Collection REFLECTIONS 3 PC MIRRORED CBNT 3 PIECE SET BOX1 TW-18546 Assembly Instructions Manual page 4

CAM-BOLT
SHOULDER
Place Cam-bolt on pre-drilled
hole and screw in vertically
Place Cam-bolt on the designated pre-drilled holes on the panel. Use a Phillips Screwdriver
to screw-in Cam-bolt vertically until shoulder is flushed (on the same level) with panel.
INSERTING CAM-LOCK
Insert Cam-lock
with arrow align
CORRECT
to Cam-bolt head
Align the arrow on the Cam-lock to the
Cam-bolt head and insert the Cam-lock.
Ensure Cam-lock is fully inserted.
INSTRUCTIONS FOR CAM-BOLT & CAM-LOCK
INSERTING AND TIGHTENING CAM-BOLT
Shoulder is flushed (on the
same level) with the panel.
x
WRONG
CAM-LOCK
TIGHTENING CAM-LOCK
Use a Flat-head Screwdriver to turn Cam-
lock clockwise so it locks onto the head of
the Cam-bolt. Turn until it is snug (about
3/4ths of a turn) -- over-tightening could
damage Cam-lock or/and Cam-bolt.
Tools Required
X
Shoulder is above the panel.
Page 4 of 11