Advertisement
Quick Links
ASSEMBLY
2-Person
REQUIREMENTS
Assembly
ASSEMBLY INSTRUCTIONS
Cabinet with Mirror
2 Hours
Tools Required
Assembly Time
(Not Provided)
(Approximate)
Thank you for purchasing our product!
Please refer and use this assembly instruction to assemble
the product. Contact our customer service department in
case there are any missing or damage parts or hardware.
We appreciate your business!
Flat Screwdriver
Phillips Screwdriver
Mallet
Page 1 of 12
Advertisement
Related Manuals for Home Decorators Collection REFLECTIONS 3 PC MIRRORED CBNT 3 PIECE SET BOX1 TW-18546
Summary of Contents for Home Decorators Collection REFLECTIONS 3 PC MIRRORED CBNT 3 PIECE SET BOX1 TW-18546
- Page 1 ASSEMBLY INSTRUCTIONS Cabinet with Mirror 2 Hours ASSEMBLY 2-Person Tools Required Assembly Time REQUIREMENTS Assembly (Not Provided) Mallet Flat Screwdriver Phillips Screwdriver (Approximate) Thank you for purchasing our product! Please refer and use this assembly instruction to assemble the product. Contact our customer service department in case there are any missing or damage parts or hardware.
-
Page 2: Assembly Preparation
ASSEMBLY INSTRUCTIONS Cabinet with Mirror ASSEMBLY PREPARATION • Remove all packaging materials, staples and packing straps from the carton. • Refer to Parts List and Hardware List, and ensure parts and hardware are complete before assembly. Contact customer service for missing parts. •... -
Page 3: Parts List
ASSEMBLY INSTRUCTIONS Cabinet with Mirror PARTS LIST BOTTOM PANEL LEFT PANEL 1 PC 4 PCS 1 PC RIGHT PANEL TOP PANEL LEFT DOOR 1 PC 1 PC 1 PC RIGHT DOOR SHELF BACK PANEL 1 PC 1 PC 1 PC HARDWARE LIST (4A) (2A) - Page 4 INSTRUCTIONS FOR CAM-BOLT & CAM-LOCK Tools Required CAM-LOCK CAM-BOLT INSERTING AND TIGHTENING CAM-BOLT SHOULDER Place Cam-bolt on pre-drilled Shoulder is flushed (on the Shoulder is above the panel. hole and screw in vertically same level) with the panel. Place Cam-bolt on the designated pre-drilled holes on the panel. Use a Phillips Screwdriver to screw-in Cam-bolt vertically until shoulder is flushed (on the same level) with panel.
- Page 5 STEP 1 - INSTALL LEG (B) TO BOTTOM PANEL (A) a) Insert Wood Dowel (1) into the hole (without screw thread) on (B) and attach leg to bottom-side of (A). Use a mallet to tap in wood dowel if necessary b) Use Bolt (4A) fitted with Flat Washer (4B) to fasten leg to bottom panel.
- Page 6 STEP 3 - INSTALL TOP PANEL (E) a) Lay Top Panel (E) bottom-side up on a material that does not scratch or damage the part, and screw in Cam-bolt (2A). Refer to Page 4 for instructions on inserting and tightening cam-bolt. b) Insert Wood Dowel (1) into the inner middle holes on top edge of side panels (C &...
- Page 7 STEP 4 - INSTALL DOOR HARDWARE a) Affix Iron Clasp (6A) to Left and Right Door (F & G) using Flat Screw (6B). b) Use Flat Head Screw (7B) to fasten Door Wing of Hinge (7A) to (F & G). c) Use Round Head Bolt (8B) to fasten Knob (8A) to each door.
- Page 8 STEP 5 - INSTALL DOOR AND MAGNETIC LOCK a) Align drill holes on Panel Wing of Hinge on Left & Right Door (F & G) to pilot holes on the respective Left & Right Panel (C & D), and use Flat Head Screw (7B) to fasten Panel Wing. b) Affix Magnet Lock (5A) to the bottom-side of Top Panel (E) using Round Head Screw (5B).
- Page 9 STEP 6 - INSTALL SHELF a) Select desired the desired level for Shelf (H) and screw in Shelf Holder (12). b) Place Shelf (H) to sit on Shelf Holder (12). Page 9 of 11...
- Page 10 STEP 7 - INSTALL BACK PANEL AND STRAP a) Place Back Panel (I) to fit on the Side, Top and Bottom Panels - check that Back Panel is spaced evenly within the 4 panels - and fasten with Round Head Screw (9) as shown. b) Use a Round Head Screw (9) fitted with Flat Washer (11B) to fasten Strap (11C) to center of Back Panel.
- Page 11 STEP 7 - FASTEN STRAP TO WALL NOTE: IN THIS STEP, BEFORE YOU DRILL A HOLE IN THE WALL ENSURE THAT THE LOCATION OF THE HOLE TO BE DRILLED IS FREE FROM HIDDEN ELECTRICAL WIRING, WATER, GAS OR OTHER UTILITY LINES AND CONDUIT. a) Drill a hole in the wall that would fit Anchor (11D) snugly and insert Anchor.
Need help?
Do you have a question about the REFLECTIONS 3 PC MIRRORED CBNT 3 PIECE SET BOX1 TW-18546 and is the answer not in the manual?
Questions and answers