OPERATING INSTRUCTIONS
PLEASE READ PRIOR TO USE
CHARGING
Fully charge for up to twelve hours before first use. Subsequent charges for two hours, or until the
•
charge indicator lights stop blinking and remain solid lit.
To charge, connect the adapter to the charging port and plug into wall charger.
•
Unit will charge whether Power Switch is in ON or OFF position.
•
In ON position, LED lights illuminate to show battery level and indicate active charging.
•
Unit may be recharged at any time and at any battery level.
•
It is not recommended to fully deplete the battery to the red LED level.
•
The average run-time is 2 hours at level three, and longer at lower levels.
•
Toggling the power switch to OFF isolates power from the circuitry and is recommended during
•
storage and travel.
OPERATING
With Power Switch in ON position, press the power button once to turn unit on to level one, twice
•
to turn unit to level two and three times for level three. Pressing the power button again will turn
the unit off. The blue LED lights will indicate the corresponding power level.
The unit will turn off after 10 minutes of use. To continue use, simply press the power button again
•
to the desired level.
MAINTENANCE , CLEANING AND STORAGE
Use a towel or soft cloth to wipe any moisture from unit.
•
Keep unit away from heat sources, liquids, and children.
•
WARNINGS AND CAUTION
Do not immerse unit in water. Keep liquids away from ventilation ports, buttons and switches.
•
Do not remove screws or attempt to disassemble.
•
Do not operate continuously for more than one hour. After one hour use, allow unit to rest for 30
•
minutes before re-using.
Unplug the unit after charging or prior to use
•
For storage or travel, toggle power switch to OFF position
•
For adult use only. Do not use if injured. Consult your doctor before using this product
•
Use product only according to Instructional Use materials available at www.hyperice.com
•
Need help?
Do you have a question about the VYPER 2.0 and is the answer not in the manual?