Page 1
Product Manual 012-16243B Wireless Diffraction Scanner OS-8441 Included Equipment Wireless Diffraction Scanner Micro USB cable For connecting the accessory to a USB charger or a USB port of a computer. Required Equipment The following table lists the equipment required to perform experiments with the Wireless Diffraction Scanner. Only one of the options provided for each item is required.
The device can remain connected to a power 1. Charge the battery. source when fully charged without damaging the battery. 2. Update your PASCO data collection software. To update PASCO data collection software 3. Update the firmware. 1. Open the PASCO data collection software.
Go to the Help menu then click Check for Updates. The Diffraction Scanner is designed to be used with a PASCO laser, diffraction slits, and track (see Required Equipment). The Diffraction Scanner can be mounted to an optics track or a dynamics track using the included and select Check for Updates.
To obtain the best data, turn the crank at a slow rate. Experiments Copy-ready experiment worksheets for classroom use are available on the PASCO website. Download the experiments for free at: www.pasco.com/resources/lab-experiments Figure 3. Diffraction Scanner mounted to two Dynamics Optics Carriages.
PASCO scientific, is prohibited. Trademarks PASCO and PASCO scientific are trademarks or registered trademarks of PASCO scientific, in the United States and/or in other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of, their respective owners.
Need help?
Do you have a question about the OS-8441 and is the answer not in the manual?
Questions and answers