Advertisement
Wiring Instruction Fo· r 2 Channel Model 100V Mode·
1. Please push the dial switches 2, 5,8 to the right, switches '1,3,4,6,7 to the left,
The 1 OOV LED indicator wiU light after the deviee set in ·1 OOV mode.
2. The signal will justinput from Ch1 in 1 00V mode, so co· n nect Ch 1 buOust keep Ch2
d;isconnected and turn Ch1 voiume controlto adjust the sound volume.
3, Please refer to the figur e below to do signal input wiring and output Wiring
to speaker system,
Wiring Instruction For 4 Channel Model 1 OOV Mode
1, Please push the dial switches 2, 5,8
The HlOV t,.ED indicator Will light after the device set in 1 00V mode.
2. The signal will just input from Ch1 or CH3 respectively in 1 OOV mode, so conne· c t
Ch 1 or C: h 3 but just keep Ch2 or CH4 disconnected and turn Ch 1 and Ch3 volume
control to adjust the sound volume.
3. IP lease ref�t
to the figure below t, o do signal input wiring and
to
system.
speaker
Page9
to
the rl9nt, switches 1,3,4,6,7 to the left.
CH3/CH4
100V Mode
Selection
Dial Switcl;es
SI nal @l
0
i
Sigrial • �
Signal@
CH3/CH4
status indlcato, LEO
lights in 1-00V mode.
1/CH2
VMode
ectlon
I Switches
CH1JCH2
st3tU$ llltticator LED
oov
lights in lf
output
wiring
+
CH1/CH2
status indicator LEO
lights in 100V mode.
mode,
CH1/CH2
100V Mode
Selection
Dial Switches
Advertisement
