What’s in the Box Figure 12: Extinguisher Tab (next to Scenarios Tab) Quick Start Guide Figure 13: Technique Tab (next to the Extinguisher Tab) Training Instructor Viewing System Set-up Troubleshooting How to Use Flaim Extinguisher Getting Started Streaming to Video Screen (Projector or Television)
FLAIM™ Extinguisher virtual reality (VR) training system. This manual should get you on your way in no time. The FLAIM Extinguisher system is designed for training instructors or trainees with minimal understanding of VR. The FLAIM Extinguisher system immerses first responders, fire wardens and the public in common real-world fire scenarios.
What’s in the box? Please see below image of the individual parts that come in your FLAIM Extinguisher box/case (Figure 2) with an explanation of what they do. Figure 1: Inside the FLAIM Extinguisher box (case) VR Headset Charger Power, HDMI and...
Page 5
Country specific power cable and power adaptor VR headset - HTC Vive Focus Head Mounted for HDMI receiver power supply (configuration Display may vary in different countries) HDMI extension cable Extinguisher controller tracking system Power cable for Head Mounted Display HDMI receiver Charge plug (country specific)
Figure 3: 1. Plug the micro USB lead into the USB port on Ensure HDMI receiver is powered (Blue This section covers the basic setup, how to use and run the FLAIM Extinguisher light) – top right your television and projector.
USB end into the supplied wall plug. Controller has batteries installed. Congratulations you are now ready to use FLAIM Extinguisher - follow the on- screen prompts and proceed to the How to use FLAIM Extinguisher section of this manual. Figure 6:...
Then Magic is about to happen. It may take 10-20 seconds to connect. 4. FLAIM Extinguisher will now be streaming to the television or projector. It will show what the VR headset view. 5. Note: It will only stream while the headset...
The Scenarios tab (Figure 11) will automatically be selected. This is where you can 2. You will now see a circle at your feet (Figure 12). Step into the centre, with the same access the different FLAIM Extinguisher training environments. orientation as shown. The scenario will then load.
Extinguishers Tab Technique Tab Select the Extinguishers Tab (Figure 14) to learn The Technique Tab (Figure 15) walks users through the extinguisher PASS technique. The FLAIM Extinguisher system has three about the various types of extinguishers and their Ie: Pull the pin, Aim at the base of the fire, Squeeze the handle and Sweep from left to different training options - Extinguisher Training, role in fire suppression.
Plug the headset in to charge for a few minutes. Headset does not turn Place the headset on your head and then press and hold the power button. FLAIM Systems maintains a support team via email at support@flaimsystems.com and will respond within 24 hours about any further technical issues.
Further Support trainees and support staff Thank you for choosing our FLAIM Extinguisher product to use as a part of your training program. For further support, please contact your local distributor or in- are protected at all times.