Honda CBR600F Shop Manual page 142

11
1
j,
I'
I
1,
I'
,,
:1
;1
I
n
:
Rear Wheel/Suspension
Rear Wheel Removal/Installation
(7)
(6)
A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated
disc with a high quality brake degreasing agent.
CAUTION
• Do not suspend the brake caliper from the brake hose. Do not twist the brake hose.
NOTE
Put the motorcycle on its center stand.
Do not depress the brake pedal when the caliper is removed, or it will be difficult to refit the disc between the brake
hose.
Adjust the drive chain slack after installing the wheel.
Procedure
Removal Order
( 1) Rear caliper bracket bolt
(2) Rear brake caliper assembly
(3) Lock nut/Drive chain adjusting nut
(4) Rear axle nut
(5) Washer
(6) Rear axle shaft
(7) Drive chain
(8) Rear wheel assembly
(9) Drive chain adjuster
13-2
Q'ty Remarks
Installation is in the reverse order of removal.
Release the brake hose from the clamp on the rear fender B
and pivot the brake caliper upward.
2/2 Loosen them all the way and push the wheel forward all the
way.
1
1
1 Install the drive chain adjusters with the graduated side
facing out.