Duramaxx 10029779 Manual page 24

Manual Photo and Video Recording: Test Mode Main Interface, press Power/Navi-
2.
gation button
settings; stop video recording by pressing again Power/Navigation button
3. Enter Menu for Setup: Test Mode Main Interface, press Menu/OK button
ter settings menu; now button
OK to save/confirm needed setup; Press and hold button
Test Mode Main Interface (Camera Modes Menu) after all settings are done; Test Mode
Main Interface, press and hold button
Mode; (indicator LED will flash 5 times, Screen will be off.)
Power Off Camera: Press and hold button
4.
ON/OFF Camera
(PIR Auto, TEST,
OFF)
Functions
Setup
24
again to shoot photos, videos, or photo + video based on camera
Camera Operation Overview
PIR Auto
Working Mode
TEST Mode
Power Off
Configuration
Return to First
Navigation Menu
Enter PIR Auto
Working Mode from
Test Mode
is always for navigation; button
for 3 seconds to enter PIR Auto Working
for 5 seconds to turn off camera
Press and hold Power/Navigation button for 3
sec; camera will enter PIR Auto Working mode
after indicator flashes 5 times.
In PIR Auto Working Mode, press Menu/OK
button once to wake up camera LCD screen to
enter TEST Mode.
Press and hold Power/Navigation button for 5
seconds to turn off camera.
In TEST Mode, press Menu/OK button to
enter settings menu; now button is always for
navigation; button is always for OK to save/
confirm needed setup.
Press and hold button for 3 seconds to return
back to First Navigation Menu after all settings
are done.
In First Navigation Menu, press and hold button
for 3 seconds to enter PIR Auto Working Mode.
.
to en-
is always for
for 3 seconds to return