Table of Contents
Advertisement
WARNING:
WARNING
Disconnect Power Source:
tion operations are completed, all covers have been properly installed and all personnel are clear of the
equipment.
WARNING
Training:
All individuals involved in the installation, operation or maintenance of this equipment must
receive and understand training in the safe and
proper methods of performing all duties assigned to them
at the time of the initial assignment and at least annually
thereafter. Safety messages and appropriate response pro-
cedures to emergencies or other situations which may arise
should be fully understood.
WARNING
Follow Safety Instructions:
read all safety messages in this manual and safety
signs on the meter. Keep safety signs in legible condition.
Replace any missing or damaged safety signs.
Learn how to operate the machine and controls properly. Do
not allow anyone to operate the meter without proper instruc-
tions.
Keep the meter in proper working condition. Only have the machine serviced by a trained service technician on a
routine basis. Unauthorized modifications to the meter may impair the function and/or safety and reduce the life of
the meter.
CAUTION
Practice Safe Maintenance:
Always disconnect power to the meter before performing any maintenance.
Keep all parts in good condition. Remove any build up of grease, oil and debris. Ensure that all parts have been
properly installed by a certified technician.
WARNING
Proper Source Voltage:
on the flowmeter name plate.
WARNING
Electrical Connections:
electrolyte are explosive. Avoid sparks by connecting the ground cable last and disconnecting it first.
All maintenance and service must be performed by a Lindsay Dealer.
Do not connect source power to the flow meter until all installa-
Carefully
Make sure the source power voltage matches the voltage specified
Keep all sparks and flames away from battery, as gases given off by
Understand maintenance procedures before doing work.
GS-2
IM3000
Safety Instructions
Hide quick links:
Advertisement
Table of Contents
