Recording - Yamaha HTR-5940 AV Owner's Manual

Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
Notes
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The setting of the TONE CONTROL (see page 31), VOLUME, the speaker level (see page 79) and the sound field programs
(see page 62) do not affect recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• S-video and composite video signals pass independently through the video circuits of this unit. Therefore, when recording or dubbing
video signals input from a video source component that provides only an S-video or a composite video signal, you can record only an
S-video or a composite video signal on your VCR.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
• The XM Satellite Radio (U.S.A. model only) signals cannot be output at the AUDIO OUT (REC) jacks.
y
Do a test recording before you start an actual recording.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
SEARCH MODE CATEGORY
EDIT NEXT
STRAIGHT l PROGRAM h
PHONES SPEAKERS
A B
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
CODE SET
POWER POWER
TV AV
MD
CD CD-R
2
CBL
DVD DTV
V-AUX DVR
TV VOL TV CH
(U.S.A. model)

RECORDING

(U.S.A. model)
VOLUME
l PRESET/TUNING/CH h
MEMORY TUNING MODE
DISPLAY
LEVEL MAN'L/AUTO FM AUTO/MAN'L
INPUT
VIDEO AUX
INPUT MODE MULTI CH
INPUT
VIDEO L AUDIO R PORTABLE
2
TRANSMIT
STANDBY POWER
SLEEP
XM
MULTI CH IN
TUNER
AMP
SOURCE
VOLUME
TV
1
Turn on all the connected components.
2
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the source
component you want to record from.
INPUT
or
Front panel
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
RECORDING
MD SLEEP
CD CD-R XM
MULTI CH IN
CBL
DVD DTV TUNER
V-AUX DVR
Remote control
43