Selecting A Sound Field Program - Yamaha HTR-5830 Owner's Manual

Selecting a sound field program

You can enhance your listening experience by selecting
sound field programs. For details about each program, see
pages 30 – 33.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT NEXT
PHONES SPEAKERS STEREO PROGRAM
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
2,3
TV
+ +
VOL CH
– –
MUTE INPUT
HALL JAZZ
1 2
MUSIC TV THTR
5 6
/DTS NIGHT
9 0
EVE
1
Press AMP.
2
Press one of the sound field program
buttons on the remote control to select the
desired program.
The name of the selected program appears on the
front panel display.
PROGRAM
Front panel
VCR V-AUX
y
• Select a program based on your listening preference. Program
names are just for reference.
VOLUME
PRESET/TUNING MEMORY TUNING MODE
SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO
INPUT
INPUT MODE 6CH INPUT
AMP
1
+
VOLUME
–
MUTE
ROCK ENTERTAINMENT
3 4
2,3
MOVIE1 MOVIE2
7 8
6.1/5.1 STEREO
+10 ENTER
SET MENU
AMP
HALL JAZZ ROCK ENTERTAINMENT
1 2 3 4
MUSIC TV THTR MOVIE1 MOVIE2
or
5 6 7 8
/DTS NIGHT 6.1/5.1 STEREO
9 0 +10 ENTER
Remote control
DTV/CBL DVD MD/CD-R TUNER CD
VOLUME
L C R
LFE SL
3
After selecting the desired program, press
the same button repeatedly to cycle through
sub-programs if available.
Example:
PROGRAM
Front panel
VCR
Notes
• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
• You cannot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
• The acoustics of your listening room affect sound field
programs. Minimize sound reflections in your room to
maximize the effect created by the program.
• When you select an input source, this unit automatically
selects the last sound field program used with that source.
• When you set this unit in standby mode, it stores the current
source and sound field program in memory and automatically
selects them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the sound field program (No. 7–9)
automatically switches to the appropriate decoding program.
• When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the front and surround speakers.
Sound can only be heard from the center speaker. (If "1A
CENTER" on the set menu is set to NONE, the center channel
sound is output from the front speakers.)
dB
SR
PLAYBACK
Pressing MOVIE 2 repeatedly
switches the sub-program between
"Adventure" and "General".
HALL JAZZ ROCK
1 2 3
MUSIC TV THTR MOVIE1
or
5 6 7
/DTS NIGHT 6.1/5.1
9 0 +10
Remote control
V-AUX DTV/CBL DVD MD/CD-R TUNER
ENTERTAINMENT
4
MOVIE2
8
STEREO
ENTER
CD
VOLUME
dB
L C R
LFE SL SR
27