Connecting Video Components - Yamaha HTR-5450RDS Owner's Manual

CONNECTIONS

Connecting Video Components

I Audio signal jacks
Be sure to connect the right channel (R), left channel (L), input (IN) and output (OUT) properly.
I Video signal jacks
Be sure to connect the input (IN) and output (OUT) properly.
I TV monitor with a 21-pin connector
Make a connection as shown on page 15 with a commercially available SCART-plug connector cable.
I S VIDEO jacks
DVD player
S VIDEO OUT
S
DVD D-TV/CBL
S VIDEO OUT S VIDEO
OUT
TV/digital TV,
cable TV or
satellite tuner
I VIDEO AUX jacks (on the front panel)
S VIDEO VIDEO L AUDIO R OPTICAL
VIDEO AUX
S
O
V R
L
14
Video monitor
S VIDEO IN
S
VIDEO SIGNAL
IN VCR 1 OUT
MONITOR OUT
VIDEO
S VIDEO
S Video signal
S
Signal flow
S VIDEO IN
VCR
OPTICAL OUT
AUDIO OUT R
AUDIO OUT L
VIDEO OUT
Game console
S VIDEO OUT
If your video component has "S" (high-resolution) video
jacks, they can be connected to this unit's S VIDEO jacks.
Otherwise, connect the composite video jacks of your video
component to this unit's composite video jacks.
Notes
• Use a special S VIDEO cable (commercially available) for the S
VIDEO connection.
• If video signals are input from both the S VIDEO input and
composite input jacks, the signals will be directed to their
respective output jacks.
These jacks are used to connect any video input source such
as a game console to this unit.