Fuses Replacement; Technical Features; F.a.q - Carbest 851320 User Instruction

UK

7. FUSES REPLACEMENT

In case of damage of the protection fuses on the PCB, it's possible to replace them with the original
spare fuses provided. To reach the fuses, remove the cover of the device, and follow the instructions
in the installation section.

8. TECHNICAL FEATURES

If you do not use the vehicle for a long time, it's recommended to disconnect all the loads to
completely interrupt any residual consumption that may discharge the service battery.
Description
Single Input Voltage Photovoltaic Panel Voltage
(VOS)
Photovoltaic panel
Maximum peak power for each input
Activation voltage charge star battery
Nominal voltage
Stand-by consumption
Size
Mass

9. F.A.Q.

• Is it possible to mount a single 200 W panel on a single input (PF1 or PF2)?
You can connect a 200 W panel such as PF1, provided the other channel (PF2) is shorted or
joined with PF1.
• What is the maximum voltage of the panel accepted?
Maximum voltage is 27 V.
• A far above 15 V battery voltage (with the sun regulator active) is normal?
Yes, it is normal when the device is in desulphation (the LED blinks 3 times). you can still
disable this function by selecting the jumper SW3 as described in the "Charging curve
selection" section.
WARRANTY:
The warranty period is 36 months. Reimo reserves the right to rectify eventual defaults. The guarantee is
excluded for all damages caused by faulty use or improper handling.
Liability limitations:
In no case Reimo will be reliable for collateral-, secondary- or indirect damages, costs, expenditure, mis-
sed benefits or missed earnings. The indicated sales price of the product is representing the equivalent
value of Reimo's liability limitations.
Carbest MPPT Solar-Laderegler | MPPT Solar Charge Device | 851320
L = 123 mm, B = 108 mm, H = 50 mm
17
Technical features
16 V – 27 V
2
150 W
< 12,5 V
12 V
5 mA
0,40 kg (cables not included)