Alarm Setting - Digital Watchdog E.S.T. DW-ESTS User Manual

DW E.S.T. (Elevated Skin Temperature) System

8.4. Alarm setting

This section, located on the center-left side of the software is enabled when "Alarm On" is selected in
"Function". To edit any of the settings in this section, "Modify" must be selected first.
Setting Description
Set the minimum and maximum temperature range that would trigger an alarm.
Alarm Setting The maximum temperature cannot be changed and is set by default to 104°F (40°C).
Temp (°C)
NOTE: Measurements captures within the set threshold will trigger an alarm.
Select the warning color from the available drop-down options.
When an alarm occurs, the face detection
box and the measured face temperature on
the temperature field will change to the set
color.
Color Warning By default, the warning color is set to red.
NOTE: All pixels whose temperature falls
within the "Alarm setting Temp." range are
expressed in the color set in the "Color
Warning".
Use Sound Enable or disable an audio alarm when the temperature is detected within the "Alarm
Effect setting Temp." range.
If "Use sound effects" is enabled, select the audio sound file to play when the alarm is
triggered. Click the folder button and find the audio file in the directory path of your PC.
Sound Effect
The default audio file is "warning_sound.select wav"
File Path
The software supports .wav and .mp3 file formats.
Only short and simple sound effects can be used. (No songs, no classical music, etc.)
Listening in
Listen to the file that is set as a sound effect.
Advance
<Alarm Settings Options>
-20-