Installing Usb Drivers - JAMAR Technologies TRAX Apollyon User Manual

TRAX Apollyon User's Manual

Installing USB Drivers

The first time you are downloading the TRAX to a computer using the USB
port, you will need to install the drivers for it. There are two drivers that
will be installed, one right after the other. These drivers are available on
the Downloads section of the JAMAR web site (www.jamartech.com), on
the installation CD for the STARnext software, and as part of the Windows
Update feature available from Microsoft using an Internet connection.
To install the drivers, first
connect a USB cable to your
computer and then to the USB
port of the TRAX. Next, turn
the TRAX on.
The Windows 'Found New Hardware' message will pop up, referencing USB
Serial Converter, then the Found New Hardware Wizard will appear.
One of the features of Windows XP and Vista is to use your Internet con-
nection to search the Windows Update web site for any available drivers for
USB devices you connect to your computer, like the TRAX Apollyon. If
you have not used this fea-
ture before, you'll first see
a screen like the one shown
to the right when you first
connect the TRAX.
The drivers for the TRAX
are available through this
feature, so if you'd like to
allow the wizard to connect
to the Internet, select one
for the first two options and
click Next.
A-2