Table of Contents
Advertisement
INSTALLATION MANUAL
Read Me First!
Your new Maple Systems OIT comes from the factory without any
communications protocol or operational software installed; therefore
The OIT will NOT operate until it has been configured using
•
OITware-200 or STEPware-100.
When power is first applied, the OIT's display will indicate that it
•
needs to be configured.
Use the OITware-200 or STEPware-100 software to create a file
•
(or "project") that can be downloaded to the OIT.
When the project is transferred, both communications protocol
•
and operational software are automatically loaded and the unit is
ready for operation.
To ensure that the OIT meets CE compliance, it is necessary to
follow all installation procedures described in this manual.
3
1010-0081A, REV 04
Advertisement
Table of Contents
