Page 2
Jumper Layout Jumper Function General Safety Information Order Information Ord.-Nr. Description 412002 Commander Zweitbesprechung R, with call buttons for Call 1+2, with internal amplifier 412012 Commander Zweitbesprechung O, without call buttons, with internal amplifier Technical Data Commander Zweitbesprechung R Supply...
Page 3
Remark: The Commander Zweitbesprechung is also available without call buttons. General Remarks The Commander Zweitbesprechung R is a hand set designed for the use as a secondary device in addition to a BOS radio on the same radio circuit. The scope of delivery includes the handset with integrated Call1 and Call2 functions and the corresponding rest with a loudspeaker and volume control.
Page 4
Tone Call Encoder The Commander Zweitbesprechung R has an internal tone call encoder for Call1 and Call2. These calls are transmitted by pressing the respective buttons on the upper side of the handset. The tone call is sent as long as the button is pressed.
Page 5
Adjusting the Microphone Level The microphone level of the handset is adjusted correctly ex factory. If you still wish to change it, the output level can be adjusted using the potentiometer near the microphone capsule at the outer side of the handset. The rest includes an AF amplifier that can be configured for different operation modes.
Page 6
Jumper Layout external loudspeaker test point internal loudspeaker 500 mV Jumper Function Jumper Function ex factory open -> loudspeaker is not muted if handset is taken closed -> loudspeaker is muted if handset is taken - - - - - - - - - - default JP2/JP3 closed at the top ->...
Page 7
November 2005, the purchasers or users are obliged to return old equipment produced by us free of cost. FunkTronic GmbH will dispose of this old equipment at its own expense according to regulations.
Need help?
Do you have a question about the Commander Zweitbesprechung R and is the answer not in the manual?
Questions and answers