Utilities; System Setup; Title Edit - Yamaha YDG2030 Operating Manual

Utilities

The [UTILITY] key allows you to set up various system parameters for the unit. Repeated
presses of the key will cycle you through the following modes. You can also use the [%] and
[%]
keys to cycle through these parameters (but this will not return to the equalization set-
ting display):
SYSTEM SET UP
Equalization
setting display
DELAY DISPLAY
NOTE
You can also exit the UTILITY mode by pressing the [DISPLAY] key.

SYSTEM SETUP

Only one parameter is available here: EMPHASIS. The emphasis function is a type of noise
reduction and can effectively be used to reduce the high-frequency noise produced during
A/D conversion and D/A conversion. It causes some deterioration of the dynamic range in
the high-frequency range, however.
Because this equipment uses a 20-bit AD/DA converter, a sufficient dynamic range is
assured even when the emphasis function is turned off. Setting it to OFF will work best for
most material most of the time.

TITLE EDIT

Each equalization setting may have a name. This may be useful in a mobile PA setup which
is often used at the same venues at different times (a setting named "UNIV. STADIUM" is
easier to remember again than program 23). Names set using this function are displayed on
the screen whenever you step through the memory areas using the [%] or [^] keys.
The [UTILITY] key will be lit for all these displays
TITLE EDIT BULK DUMP
MIDI CONTROL SOFTWARE PROTECT
Use the F encoder to turn emphasis on and off (this trips
an internal relay, so you will hear a "click" as this is
switched).
Use the F encoder to select a character (0-9, A-Z, a-z +
punctuation) and the [L/<] and [R/>] keys as cursor keys to
determine which character will be edited. Use the [STORE]
key as an easy way to enter a space.
9 – Utilities
Y-485 NETWORK
Y-485 COMM. I/O
PARAMETER COPY
YDG2030