Connections - Yamaha AX-890 Owner's Manual

Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this
unit.
Compact disc player
CD
GND
PHONO
COUPLER
Turntable
AC OUTLETS (SWITCHED)
(Europe and General models)
............................................................3 SWITCHED OUTLETS
(Australia model) ...................................1 SWITCHED OUTLET
Use these to connect the power cords from your components
to this unit.
4

CONNECTIONS

Tuner
TUNER
TAPE
PB
TAPE 1
REC
OUT
TAPE
REMOTE
PB
CONTROL
TAPE 2
REC
OUT
A
AUX
MAIN
PHONO
IN
B
PRE
OUT
A OR B:6 MIN./SPEAKER
Video cassette player,
LD player, etc.
Tape deck 1
Right
AC OUTLETB
SWITCHED
200W MAX.TOTAL
SPEAKERS
A B:l2 MIN./SPEAKER
Right
Tape deck 2
: Refer to "ABOUT THE OTHER REAR PANEL PARTS" on page 5.
The power to the SWITCHED outlets is controlled by this unit's
POWER switch or the provided remote control transmitter's
POWER key. These outlets will supply power to any
component whenever this unit is turned on.
The maximum power (total power consumption of
components) that can be connected to the SWITCHED AC
OUTLETS is 200 watts.
Speakers A
Left
(Europe model)
Left
Speakers B
MAINS
To AC outlet