Ommisioning Nad - Alarm NAD Installation Manual

6. Commissioning NAD
The NAD is commissioned by ALARMNZ and those building service contractors who
require external network access to remotely program equipment need to contact the
AlarmNZ help desk to arrange testing.
NAD 3G wireless Commissioning check-list

NAD mounted in best signal location (near the Fire Alarm equipment )

NAD secured to wall with appropriate fasteners

Dedicated 230VAC feed – Switchboard, breaker, and location labelled at outlet.

Batteries dated and initialled – connected observing correct polarity

Connected Fire SGD's are being polled

Signals are being received by Alarm New Zealand

Connection documentation completed and returned to Alarm New Zealand
NAD ADSL Commissioning check-list

ADSL Ph, number of NAD ADSL line confirmed same as connection documentation

NAD mounted near Telecom Demarcation point.( ADSL BT Jack installed)

Captive BT jack-point upgraded on the Telco Demarcation point.

ADSL splitter installed at Telco Demarcation as per ADSL wiring diagram

NAD secured to wall with appropriate fasteners

Dedicated 230VAC feed – Switchboard, breaker, and location labelled at outlet.

Batteries dated and initialled – connected observing correct polarity

Connected Fire SGD's are being polled

Signals are being received by Alarm New Zealand

Connection documentation completed and returned to Alarm New Zealand
26 February 2014
Copyright Alarm New Zealand Ltd 2012
The Quality Leader
NAD Installation Manual
Page - 8 -