.....................9 LTERATIONS ....................9 ONTACT Table of Figures NAD O ............4 UILDING ERVICES VERVIEW ..........5 ERVICES ETWORK CCESS EMARCATION PFA, DBA SGD W ................7 IRING Copyright Alarm New Zealand Ltd 2012 26 February 2014 The Quality Leader Page - 2 -...
Page 3
Testing/commissioning changes by Ben Wyness 2008 Update 10 February 2009 Copy proof read and re-edited by N. Clifton Update November 2012 Included Building services overview drawings Copyright Alarm New Zealand Ltd 2012 26 February 2014 The Quality Leader Page - 3 -...
The NAD (Network Access Device) is designed for connection of 3 party broadband services equipment to any Telco network for within a corporate business site. The NAD normally includes dedicated xDSL, FTTx or xG wireless network gateway equipment that operates independently from the business network and is managed and supported by the Building Services ISP ( ALARMNZ).
Demarcation Point. If the UTP cable length exceeds 90 Meters for connection of building services equipment back to a NAD, then a second NAD may need to be located somewhere else on the site, allowing the building services equipment to connect to the closest point.
Normally an 8 way data outlet is required from either the building UTF distributor to the NAD which is mounted nearby. If a fibre interconnection is used either between NADs, or cabled to any building services equipment then a fibre outlet will be required at the NAD from that building distributor.
Krone terminals in captive BT socket. 5.7 WIRELESS 3G NAD If possible check GSM/CDMA signal strength at proposed NAD location with a mobile. If insufficient signal is available relocate NAD to higher level in building away from steel and steel reinforced concrete structures if possible.
NAD Installation Manual 6. Commissioning NAD The NAD is commissioned by ALARMNZ and those building service contractors who require external network access to remotely program equipment need to contact the AlarmNZ help desk to arrange testing. NAD 3G wireless Commissioning check-list ...
NAD Installation Manual 7. Alterations Contractors must contact Alarm New Zealand helpdesk before altering or connecting equipment to the services network. 8. Contact All enquiries regarding connection and installation of this unit should be directed to: helpdesk@alarmnz.com, Phone 09 3030303...