IKOS INTRA S Series User Manual page 46

Electric diagram
EN
Ventilation control
In order to control ventilation , three modes / operating positions are available:
In "0" position, the fan is automaticaly controled at low speed, and turns ON at temperatures
above 50 °C.
In the "I" the fan is driven by manual control in lowspeed.
In position "II" the fan is driven by manual control at maximum speed.
NOTE
When selecting the manual mode, the fan will not turn off automatically, is necessary to put
the ventilation control to "0" position.
Pre-startup scan
Before lighting the insert, follow the instructions:
Ensure that the deflector is in correct position;
Ensure that the primary air inlet is fully open and works properly;
It's imperative that the equipment is tested before closing the chimney housing.
EN // 46
USER'S MANUAL