Broadcast Tools RJ-XLR Series Installation And Operation Manual

Breakout panels

Advertisement

Quick Links

P R O B L E M   S O LV E D
Installation and Operation Manual
RJ-XLR 8F 8M (8 Female XLR, 8 Male XLR)
If you need a firmware upgrade, contact Broadcast Tools®
No part of this document may be reproduced or distributed without permission.
ALL SPECIFICATIONS AND FEATURES FOR THIS PRODUCT ARE SUBJECT TO
NOTE: We recommend the use of Chrome, Firefox or Safari as your browser.
Due to the dynamic nature of product design, the information contained in this
document is subject to change without notice. Broadcast Tools, Inc., assumes no
responsibility for errors and/or omissions contained in this document. Revisions
of this information or new editions may be issued to incorporate such changes.
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
All Sentinel® labeled products are registered trademarks of Broadcast Tools, Inc.
Copyright® 1989 - 2020 by Broadcast Tools, Inc. All rights reserved.
No part of this document may be reproduced or distributed without permission.
Visit www.broadcasttools.com for important product update information.
RJ-XLR Breakout Panels
RJ-XLR 16F (16 Female XLR)
RJ-XLR 16M (16 Male XLR)
Manual update: 8/25/2020
CHANGE WITHOUT NOTICE
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RJ-XLR Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Broadcast Tools RJ-XLR Series

  • Page 1 NOTE: We recommend the use of Chrome, Firefox or Safari as your browser. Due to the dynamic nature of product design, the information contained in this document is subject to change without notice. Broadcast Tools, Inc., assumes no responsibility for errors and/or omissions contained in this document. Revisions of this information or new editions may be issued to incorporate such changes.
  • Page 2: Table Of Contents

    RJ-XLR Installation and Operation Manual Table of Contents Section Title ........Page # Introduction .
  • Page 3: Introduction

    If you are unfamiliar with this type of NOTE: equipment, please contact a properly qualified engineer to handle the installation and setup of the RJ-XLR Breakout Panel. Broadcast Tools, Inc., is unable to support This manual should be NON-Broadcast Tools software, hardware or NON-Broadcast Tools computer/hard- read thoroughly before ware/software problems.
  • Page 4: Product Overview

    RJ-XLR Installation and Operation Manual Product Overview The Broadcast Tools RJ-XLR Breakout Panels are 1RU 19” rack panels that convert XLR jacks to RJ45 audio jacks using the standard Cat5 audio pinout. The XLR jacks are paired to feed stereo audio to a stereo RJ45 jack as well as split out to two addi- tional individual RJ45 jacks for mono/AES operation for a total of 8 stereo RJ45 jacks and 16 mono/AES RJ45 jacks.
  • Page 5: Installation/Operation

    RJ-XLR Installation and Operation Manual Installation/Operation Physical Properties: 1-RU, 19.00" x 3.00” x 1.75" (WDH), rack mount painted alu- minum panel with printed circuit board. Chassis Ground Screw: One of the three #4-40 sized chassis ground screws, labelled MH1, MH2, and MH3 respectively, should be tied to the station (house) or system ground.
  • Page 6: Rj45 Audio Jacks

    RJ-XLR Installation and Operation Manual RJ45 Audio Jacks The RJ-XLR Breakout Panel has eight sets of three RJ45 jacks (24 total), allowing each pair of XLR jacks to feed one RJ45, labelled Stereo x/x, as a L/R stereo pair or to feed two separate RJ45 jacks (AES x) as independent AES or mono signals.
  • Page 7: Rj45 To Xlr Connection Tables

    RJ-XLR Installation and Operation Manual RJ45 to XLR Connection Tables WEBSITE: Visit our web site for product updates and additional information. OPERATION e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 8: Warranty

    If Broadcast Tools is notified, in writing, of a failure of any item manufactured by Broadcast Tools to conform to the foregoing Limited Warranty within one (1) year following the date of the Buyer’s acquisition of the item, and if the item is returned to Broadcast Tools in accordance with Broadcast Tools’...
  • Page 9 RJ-XLR Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 10 RJ-XLR Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 11 RJ-XLR Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 12 RJ-XLR Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 13 RJ-XLR Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 14 RJ-XLR Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...

This manual is also suitable for:

Rj-xlr 8f 8mRj-xlr 16fRj-xlr 16m

Table of Contents