Yamaha AX-10 Owner's Manual page 7

TO RECORD A SOURCE TO TAPE (OR DUB FROM A TAPE TO ANOTHER)
1
Select the source to be recorded.
REC OUT
TAPE 1
TAPE 2
AUX
2
Play the source.
3
Confirm the source by selecting it with the INPUT
selector and turning up the VOLUME control.
INPUT
TAPE 1
TAPE 2
AUX
VOLUME
0
When you listen with headphones
Connect the headphones to the PHONES jack. When listening
with headphones privately, set both the SPEAKERS A and B
switches to the OFF position.
CD
TUNER
PHONO
CD
TUNER
PHONO
l0
3, 5 3
1
4
Set the tape deck to be used for recording in the
recording mode.
5
To monitor the sound to be recorded, select the tape
deck being used for recording with the INPUT selector.
INPUT
TAPE 1
TAPE 2
AUX
Notes
If you want to enjoy another source while recording, select it
with the INPUT selector.
VOLUME, BASS, TREBLE, BALANCE controls and PURE
DIRECT switch settings have no effect on the material being
recorded.
CD
TUNER
PHONO
PHONES
7