Using The Ausculette Ii - Cardionics AUSCULETTE II Operator's Manual

4.0 USING THE AUSCULETTE II

1. Insert stethophones into rear panel of Ausculette II main control box.
If using the Ausculette for Telemedicine, use a connecting cable from the
rear panel to the audio input of the Teleconferencing system.
2. Insert Cardionics stethoscope assembly into the front panel.
3. Place the stethoscope on the patient and instruct the listeners to put on the
stethophone..
4. Turn ON the system using the VOLUME control on the front panel.
5. Set the filter control on the front panel as desired. Cardionics recommends
40Hz as a starting point.
6. Listen to the patient.
7. Turn OFF the system when finished to avoid battery drain.
8. To record sounds, insert a cable connection (1/4" jack) into one of the
outputs on the rear panel and connect the distal end to a PC or laptop
computer.
Use the computer's media player or install the StethView Digital Recording
System. This system will display a phonocardiogram on the screen and
permit recording up to 2 minutes.
3