B, Fill The Rinse Aid Dispenser - Brandy Best RED6D Instruction Manual

Step 2: select a certain level of salt consumption
Press the Start/pause button to select the proper set according to your local environment, the sets will
change in the following sequence: H1->H2->H3->H4->H5->H6;
Step 3: Exit the status of salt adjustment
Without any operation in five seconds, the machine will exit from set mode, the machine is into
standby status
There are 6 levels of salt consumption in all.It is recommended to select the level according to below table:
Water Hardness level
dH
o 1)
0-5
6-11
12-17
18-22
23-34
35-45
Note:
1) German degree of measurement for the water hardness
2) millimol, internationel unit for water hardness
*) factory setting
Contact your local water board for information on the hardness of your water supply.
B. Fill the Rinse Aid Dispenser
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can
leave spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher
is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent
dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns
completely black. The volume of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
mmol/l
2)
0-0.9
1.0-2.0
2.1-3.0
3.1-4.0
4.1-6.1
6.2-8.0
8
Setting on the
water softener
1
2
3
4*
5
6
Digital display stalls
H1
H2
H3
H4
H5
H6