Specifications - Yamaha SW10 Owner's Manual

Specifications
General specifications
Type........................................... Bass Reflex Powered Speaker
Frequency Range ....................... 25–150 Hz (–10 dB)
Sensitivity .................................. –12 dB at Vol. Max (for 100 dB/SPL, 1 m on Axis)
Maximum Output Level ............. 111 dB (1 m on Axis)
Dimensiones (W
Weight ....................................... 26 kg
Speaker unit
Speaker Unit .............................. 25 cm Cone (8 , magnetic shielded)
Enclosure ................................... Type: Bass Reflex
Amp.unit
Maximum Output Power............ 180 W at 100 Hz, THD= 1%, RL= 8
Input Sensitivity/Impedance ....... –6 dB to +4 dB/10 k (Input 1, 2, 3)
Hum & Noise............................. –60 dBu (Volume= Min) DIN Audio filter
Signal to Noise Ratio.................. 100 dB (IEC-A Weighting)
Controls ..................................... VOL (Level Control)
Connectors ............................... Input 1, 2, 3 (XLR-3-31), Output 1, 2, 3 (XLR-3-32)
Power Indicator/Clip Indicator ... Green/Red LED
Power Requirement.................... USA and Canada: AC 120 V, 60 Hz
Power Consumption................... 160 W
Specifications and appearance are subject to change without notice.
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 11A
Conformed Environment: E1, E2, E3 and E4
Dimensions
W: 328
6
H D).......... 328 459
CUTOFF FREQ. Control: 40–120 Hz (Variable)
PHASE Switch: REV/NORM
POWER Switch: ON/OFF
Europe:
Others:
476 mm
AC 230 V, 50 Hz
AC 240 V, 50 Hz
407 69
D: 476
Unit: mm