Table of Contents
Advertisement
The set is in M-Node now. Then go to
I
Design Menu by Pressing MENU =>
1 9 5 0
Go to Setup design menu and Select
J
Clear EEPROM option and press OK key
of remote.
After Clear EEPROM, the set will go to
K
stand by and will again restart
automatically in RF source.
Then verify the modelwise Audio/
Video settings as per Design data.
L
Verify the SW date and version in
Version info menu of Design data
Then press Shipping in Setup design
menu by pressing OK key of remote,
M
then Switch OFF and again Switch ON
the SET. The SW loading process Is
complete.
Note :- 1) SW & E2P update through USB is possible with mains off/on , but only if M Mode is ON
2) In M Mode if press standby key , then M Mode Becomes Off
11
Hide quick links:
Advertisement
Table of Contents
