Advertisement
Table of Contents
U s e r M a n u a l
CAM-VW7
PRODUCT FEATURES:
Image Sensor: 1/3" CMOS
TV Lines: 700
TV System: PAL
Image: Mirror
Viewing Angle: 170 Degrees
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 37mA @ 13.8V
Enhanced Performance In Low Light: Yes
Waterproof Rating: IP69K
Operating Temperature: -40 Degrees C to +80 Degrees C
DISCLAIMER:
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any tech-
nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-
mation as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Volkswagen Twin Rear Door Camera
Volkswagen Transporter T5/T6
Advertisement
Table of Contents
Related Manuals for 2connect CAM-VW7
Summary of Contents for 2connect CAM-VW7
- Page 1 U s e r M a n u a l CAM-VW7 Volkswagen Twin Rear Door Camera Volkswagen Transporter T5/T6 PRODUCT FEATURES: Image Sensor: 1/3” CMOS TV Lines: 700 TV System: PAL Image: Mirror Viewing Angle: 170 Degrees Operating Voltage: 12V DC (Negative Ground) Current Consumption: 37mA @ 13.8V...
- Page 2 1. Remove the relevant brake light housing from the vehicle and carefully remove the bulbs/bulb holder assembly. 2. Insert the bulbs/bulb holder assembly into the CAM-VW7 and refit to the vehicle taking care not to trap any cables. 3. Connect the camera cable to the camera connection cable.
Need help?
Do you have a question about the CAM-VW7 and is the answer not in the manual?
Questions and answers