Loading Settings - Yamaha Digital Sound Projector YSP-900 Owner's Manual

5
Press / to select MEMORY1,
MEMORY2 or MEMORY3 and then press
ENTER.
The following screen appears on your TV.
ENTER
6
Press ENTER again.
The new parameters are saved as MEMORY1,
MEMORY2 or MEMORY3. Once the parameters are
saved, the display returns to the SET MENU screen.
ENTER
7
Press MENU to exit.
The SET MENU screen disappears from your TV.
MENU
ENTER
2)MEMORY SAVE
MEMORY1 Save Now ?
Push [ENTER] to Save
2)MEMORY SAVE
MEMORY1 Saving
SET MENU
. ;MEMORY
;AUTO SETUP
;MANUAL SETUP
;LANGUAGE SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter

Loading settings

You can recall the settings saved in "Saving settings" on
page 34 according to the varying conditions of your
listening environment.
1
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
TV/AV
YSP
2
Press MENU on the remote control.
The SET MENU screen appears on your TV.
MENU
y
• The control buttons used for SET MENU are displayed on
the bottom of the screen.
• To return to the previous screen while using SET MENU,
press RETURN on the remote control.
• To cancel the SET MENU screen, press MENU once
more.
• You can also perform the following operations in the front
panel display.
3
Press / to select MEMORY and then
press ENTER.
The following screen appears on your TV.
ENTER
USING THE SYSTEM MEMORY
SET MENU
. ;MEMORY
;AUTO SETUP
;MANUAL SETUP
;LANGUAGE SETUP
[ ]/[ ]:Up/Down
[ENTER]:Enter
ENTER
;MEMORY
. 1)LOAD
2)SAVE
[ ]/[ ]:Up/Down
[ENTER]:Enter
35
En