Listening To Music - PIONEER DJ HDJ-CUE1BT-K Instruction Manual

Listening to music

Listening to music with Bluetooth
If the Bluetooth device is compatible with "A2DP" or "AVRCP" Bluetooth profiles, you can use
the remote control on the headphones to perform actions such as music playback.
• A2DP (Advanced Audio Distribution Profile): Transfers sound to the headphones.
• AVRCP (Audio/Video Remote Control Profile): Allows remote control operation from the
headphones.
1 Connect the Bluetooth device to the headphones (page 5).
2 Choose the music or video you wish to listen to from the
Bluetooth device.
• The sound from the music or video plays back through the headphones.
• When fully charged, playback time is approximately 30 hours. (Sometimes less
depending on the conditions of use.)
Notes
• Note that the sound may leak out of the headphones at certain volume levels.
• Increasing the volume of the headphones to nearly maximum may cause music, etc. to
sound distorted. If this occurs, lower the volume until the music sounds clear.
Operating methods
7