Bluetooth Device - PIONEER DJ HDJ-CUE1BT-K Instruction Manual

• In some cases the MAC address "□□□□□□" (where "□" is a specific character string that
differs for each device) appears before "HDJ-CUE1BT" is displayed.
• If a passkey entry is requested, enter the passkey of the headphones "0000" (four
zeros).
4 On the headphones, check the connection to the paired

Bluetooth device.

• The LED blinks red and white alternately until connection with the device is complete.
• When the white LED lights, pairing is complete.
Notes
• The headphones power will turn off if connection to the device does not complete within
five minutes. If this occurs, register the device again.
• Two or more Bluetooth devices cannot be connected with the headphones at the same
time.
• The headphones can register up to eight Bluetooth devices. If more than the maximum
number of devices are registered, already registered Bluetooth devices will be overwritten
in order from the device first connected. Register the devices again if you wish to use them.
• If the headphones are near to a Bluetooth device that it was previously connected to, it may
automatically connect to the same device upon turning on. To connect to a different
Bluetooth device, turn off the Bluetooth function of the connected Bluetooth device or turn
off the headphones and carry out pairing again.
Operating methods
6