Yamaha DPX-1 Owner's Manual page 29

3.
Select "YES" by pressing the h or g button, and then
press the SELECT button to reset the lamp running
time to 0.
IMAGE SIGNAL
PRESS "SELECT" TO RESET
LAMP RUNNING TIME ON
"YES".
LAMP RUNNING TIME 2H.
ESCAPE: EXIT
4.
Press the MENU button to close the menu.
G Submenu operation—"RESET"
[Operation group D]
1.
Select the menu item "RESET" in the menu group
"INITIAL" by following steps 1—3 in "Basic menu
operation".
The submenu mark " " appears on the right side of the item.
IMAGE SIGNAL
COLOR SYSTEM
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
2.
Press the SELECT or + button to open the submenu.
IMAGE SIGNAL
RESET
ESCAPE: EXIT
INITIAL SETUP
NO
YES
MEMORY1 VIDEO
INITIAL SETUP
AUTO
COMPONENT
RGB PC
ENGLISH
OFF ON
2H.
MEMORY1 VIDEO
INITIAL SETUP
ALL SETTINGS
ALL MEMORIES
CURRENT MEMORY
MEMORY1 VIDEO
3.
Select the submenu item to be reset by pressing the
h or g button.
IMAGE SIGNAL
RESET
ESCAPE: EXIT
4.
Press the SELECT or + button to open the confirma-
tion message screen.
IMAGE SIGNAL
PRESS "SELECT" TO RESET
TO FACTORY SETTINGS.
ESCAPE: EXIT
5.
Press the SELECT button to reset to the factory
setting.
The menu closes after the parameters have been reset to the
factory settings.
Menu operation
INITIAL SETUP
ALL SETTINGS
ALL MEMORIES
CURRENT MEMORY
MEMORY1 VIDEO
INITIAL SETUP
MEMORY1 VIDEO
23
E-