Advanced Chipset Features - IBASE Technology IB704 User Manual

BIOS SETUP

Advanced Chipset Features

This Setup menu controls the configuration of the chipset.
CPU Frequency
Memory Frequency
CAS Latency
Interleave Select
XOR BA0
XOR BA1
XOR BA2
XOR BA3
XOR Bit Select
Video Memory Size
Output Display
Flat Panel Configuration
Onboard USB1.1
Onboard USB2.0
Onboard IDE
Overcurrent Reporting
Port 4 Assignment
Memory Hole At 15M-16M
CPU Frequency
This options for this field are Auto, 433MHz and 500MHz.
Memory Frequency
This default setting for this field is Auto.
CAS Latency Time
You can configure CAS latency time in HCLKs as 1.5, 2, 2.5, 3 or 3.5.
The system board designer should set the values in this field, depending
on the DRAM installed. Do not change the values in this field unless you
change specifications of the installed DRAM or the installed CPU.
Video Memory Size
The default setting for this field is 8M. The options are from 8M to
254M.
Output Display
The default setting for this field is CRT.
Flat Panel Configuration
This options for this field are Flat Panel, CRT and Panel & CRT. For
flat panel, configuration settings include Flat Panel Type, Resolution
(320x240 up to 1600x1200), Data Bus Type, Refresh Rate (60~100Hz),
HSYNC Polarity, VSYNC Polarity, SHFCLK Active Period and LP
Active Period.
26
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
Auto
Auto
Auto
LOI
Disabled
Disabled
Disabled
Disabled
18
8M
CRT
Press Enter
Enabled
Enabled
Enabled
Disabled
Host
Disabled
IB704 User's Manual
ITEM HELP
Menu Level >