y
t
0°C
A YAMALUBE 4(10W-30)
D SAE 10W
C SAE #20
32°F
AE01074
ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up
q
2. Loosen the bolt 1 and remove the cover 2.
w
3. Remove the rubber cap 3 and the oil filler cap 4.
788-004a
4. Place an oil pan under the engine. Remove the oil
u
5. Check the drain plug, gasket 6, oil filler cap and
6. Reinstall the oil drain plug.
r
e
700-123b
7. Add engine oil to the upper level.
q
1 Upper level
700-006a
25°C
B SAE #30
80°F
700-065
NOTE:
Recommended engine oil classification:
API Service "SE" or "SF".
cC
Be sure no foreign material enters the crankcase.
8. Install the oil filler cap, the rubber cap and the
the engine for several minutes.
Then stop the engine.
drain plug 5 so that the oil can be completely
drained.
O-ring 7.
If damaged, replace.
Drain Plug Torque:
17 N•m (1.7 kgf•m, 12 lbf•ft)
Recommended oil:
å YAMALUBE 4 (10W-30) or SAE 10W-30
type SE motor oil
∫ SAE #30
ç SAE #20
∂ SAE 10W
Engine oil quantity:
0.6 L (0.53 Imp qt, 0.63 US qt)
cover.
– 26 –