Guiding The Trolley In The Most Effective Way; Steering - QOD Q1 User Manual

Page 23 of 29

Guiding the Trolley in the Most Effective Way

The QOD trolley is designed, with balance in mind, to avoid tipping backwards when
hitting large bumps or indentations on the course. The trolley achieves best balance
results by placing the battery over the front wheels to act as a counter balance. This
does not affect the ease of steering; however it does give the trolley more tracking
capabilities as the front wheels have less chance of bouncing. Very rough terrain or
rock trolley paths will affect the tracking.
Never leave the trolley unattended on downhill slopes. If you do, the trolley may run
away from you. Place the trolley sideways to avoid rolling if left unattended.

Steering

Easy turning on the drive wheel by lifting the front wheels:
For small directional changes of less than 45 degrees, simply apply sideways pressure
to the handle. Do not twist the handle or put the trolley in a position where it is
running on two outside wheels. For abrupt turns, the one way bearing makes turning
on the drive wheels easy to do on all surfaces.
For abrupt turns of 45 degrees or more, simply push down on the handle and turn the
trolley. The differential action of the one way bearings allows one wheel to remain
stationary and the other wheel to rotate. Just like the drive wheels of a vehicle.
QOD Golf International. www.qodgolf.com
Warning: Product Patent Protected, Design Protected, Copyright Protected. All rights Reserved