Table of Contents
Advertisement
E1000 Series Safety and Installation Instructions
Power Supply
The product must be powered using a PoE+ injector conforming to the Type 2
PSE defined in IEEE 802.3at, such as that supplied with the product.
The PoE+ injector must be connected to the product using Cat 5e or better
cabling.
The supplied PoE+ injector requires an input voltage of 100-240 VAC at 50-60
Hz, and draws a current of up to 0.8 A.
Radio Spectrum
The product must only be operated as authorized by the national
regulatory authority for radio spectrum in the country in which it is installed
SI-00101 v2
7
Advertisement
Table of Contents
