Charging Procedure - Briggs & Stratton BSB2AH82 Manual

EN
AR BG CS DA DE EL ES
CLEANING
Wipe the outside of the charger with a dry,
soft cloth. Do not hose down or wash with
water.
Class II
For indoor use only
Before charging, read the
instructions
F8A
Fuse
(EBSRC82 Charger)
T3.15A
Fuse
(EBSSC82 Charger)
WARNING
The appliance is not to be used by The appliance is not to be used by
persons (including children) with reduced persons (including children) with reduced
physical, sensory or mental capabilities, physical, sensory or mental capabilities, physical, sensory or mental capabilities,
unless they have been given supervision unless they have been given supervision unless they have been given supervision
or instruction. Children being supervised or instruction. Children being supervised or instruction. Children being supervised or instruction. Children being supervised
not to play with the appliance. not to play with the appliance. not to play with the appliance.
Children shall not play with the appliance. Children shall not play with the appliance. Children shall not play with the appliance. Children shall not play with the appliance.
Cleaning Cleaning Cleaning and and and
should not be made by children should not be made by children should not be made by children should not be made by children
without supervision. without supervision. without supervision. without supervision. without supervision.
If the supply cord is damaged, it If the supply cord is damaged, it If the supply cord is damaged, it
must be replaced by manufacturer, must be replaced by manufacturer, must be replaced by manufacturer,
its service agent or similarly qualified its service agent or similarly qualified its service agent or similarly qualified
persons in order to aviod a hazard. persons in order to aviod a hazard. persons in order to aviod a hazard.
ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SV TR
English (Original instructions)
user user user maintenance maintenance maintenance

CHARGING PROCEDURE

NOTE: The battery is not shipped fully
charged. It is recommended to fully charge
before use to ensure that maximum run
time can be achieved. This lithium-ion
battery will not develop a memory and may battery will not develop a memory and may
be charged at any time.
1. Plug the charger into an AC power Plug the charger into an AC power Plug the charger into an AC power
outlet.
2.
charger (2).
1
This is a diagnostic charger. The Charger This is a diagnostic charger. The Charger This is a diagnostic charger. The Charger
LED Light will illuminate in specific order LED Light will illuminate in specific order LED Light will illuminate in specific order
to communicate the current battery status. to communicate the current battery status.
They are as follows:
LED STATUS
Solid Green
Solid Red
4
1 1 1
2
DESCRIPTION
Charging
Fully Charged
Over Temperature
Charging Fault
2